Kitchen Hoods

COMMERCIAL KITCHEN EXPERTS

EXHAUST ONLY
GREASE HOOD
  • Constructed of 18G (1.2mm) stainless steel
  • All visible welded joints are polished to match original finish
  • Available in lengths of 3′ to 16′
  • Washable 20″ high galvanized grease filters
  • Pre-wired lights (1 light per 5 ft of hood)
  • 3″ stand-off
  • Easy installation
  • Listed
  • Meets NFPA96 requirements
  • Quick delivery
Installation
  • The hood should be installed 6’6” from the floor. Hanging brackets are welded at all four corners
  • A 3″ clearance is required when the hood is in contact with semi-combustible materials. As per NFPA96 Standards, a stainless steel stand-off is required (included)
Options
  • Fire Suppression System
    (Complete Fire Suppression System may be factory installed. Final hook-up not included)
  • Stainless steel filters
  • Backsplash
INTEGRATED MAKE UP AIR
MAKE UP AIR HOOD
  • Constructed of 18G (1.2mm) stainless steel
  • All visible welded joints are polished to match original finish
  • Available in lengths of 3′ to 16′
  • Washable 20″ high galvanized grease filters
  • Pre-wired lights (1 light per 5 ft of hood)
  • 3″ stand-off
  • Easy installation
  • Listed
  • Meets NFPA96 requirements
  • Quick delivery
Installation
  • The hood should be installed 6’6” from the floor. Hanging brackets are welded at all four corners
  • A 3″ clearance is required when the hood is in contact with semi-combustible materials. As per NFPA96 Standards, a stainless steel stand-off is required (included)
Options
  • Fire Suppression System
    (Complete Fire Suppression System may be factory installed. Final hook-up not included)
  • Stainless steel filters
  • Backsplash
FULLY CUSTOM
LOW PROFILE HOODS
  • Constructed of 18G (1.2mm) stainless steel
  • All visible welded joints are polished to match original finish
  • Available in lengths of 3′ to 16′
  • Washable 20″ high galvanized grease filters
  • Pre-wired lights (1 light per 5 ft of hood)
  • 3″ stand-off
  • Easy installation
  • Listed
  • Meets NFPA96 requirements
  • Quick delivery
Installation
  • The hood should be installed 6’6” from the floor. Hanging brackets are welded at all four corners
  • A 3″ clearance is required when the hood is in contact with semi-combustible materials. As per NFPA96 Standards, a stainless steel stand-off is required (included)
Options
  • Fire Suppression System
    (Complete Fire Suppression System may be factory installed. Final hook-up not included)
  • Stainless steel filters
  • Backsplash
FULLY CUSTOM
CUSTOM FINISHES
  • Constructed of 18G (1.2mm) stainless steel
  • All visible welded joints are polished to match original finish
  • Available in lengths of 3′ to 16′
  • Washable 20″ high galvanized grease filters
  • Pre-wired lights (1 light per 5 ft of hood)
  • 3″ stand-off
  • Easy installation
  • Listed
  • Meets NFPA96 requirements
  • Quick delivery
Installation
  • The hood should be installed 6’6” from the floor. Hanging brackets are welded at all four corners
  • A 3″ clearance is required when the hood is in contact with semi-combustible materials. As per NFPA96 Standards, a stainless steel stand-off is required (included)
Options
  • Fire Suppression System
    (Complete Fire Suppression System may be factory installed. Final hook-up not included)
  • Stainless steel filters
  • Backsplash
5 Tips to Consider for your Kitchen Hood Project
  • TYPE 1 OR TYPE 2? - It depends on the type of cooking that you’re doing.
  • EXHAUST RATE - The amount of exhaust air removed from your space is expressed as cubic feet per minute, or CFM.
  • HOOD DESIGN - The right choice for you will depend on the design of your kitchen the cooking appliances you’re using.
  • PHYSICAL SIZE AND MOUNTING HEIGHT - Is it the right size to create the capture zone you need for your cooking appliances?
  • VENTILATION DESIGN - The size and shape of your ducting to the outside, the length of your ducting runs as well as the number and direction of bends that are needed
Request Quote